TOOL HOLDERS FOR HAAS CL-1 & HARDINGE AHC CHUCKERS

TURNING

1/2" Fixed Center 1/2" SQ Tool Holder

• TURN FROM EITHER SIDE OF THE PART BY REVERSING THE SPINDLE DIRECTION.

• ALSO FITS HARDINGE & HAAS TURRET PLATES.

1/2" Fixed Center 1/2" SQ Tool TURNING & FACING HOLDER

 AVAILABLE IN RIGHT OR LEFT HAND

Posi-lock POST AND ExtenDED Turning Tool HolderS

1/2" SQ. TOOLS

1.  Posi-Lock Post. 2.  Posi-Lock Head. 3.  Clamp Wedge. 4.   Adjusting Screw. 5.  Hold Down Screws. 6. Locking Screws. 7. Tool Clamp Screws. 8. T Nuts. 9. Dowel Pin. 

POST & EXT SOLD SEPARATELY

Combo 1/2" SQ. Turning Tool Holder

LEFT HAND SHOWN

POST & EXT SOLD SEPARATELY

 FOR turning and / or facing.         

                                               AVAILABLE IN right or left hand.

Compact 3 Holder

 use three drills or other tools only using 2" of space.

POST & EXT SOLD SEPARATELY

11/16" T-Blade cut-off holder

.Accepts .040 to .125 wide blades.

TWO STYLES FOR FRONT OR far side of THE table

POST & EXT SOLD SEPARATELY

DRILlING & BORING HOLDERS

Single Position

LEFT HAND SHOWN

5/8" & 3/4" BORE AVAILABLE

Single Position HEAVY DUTY

These holders are designed for larger work

Double hold down bolts provide extra clamping for heavy turning.

5/8" & 3/4" BORE AVAILABLE

 Two Position holder

Slightly wider than the one position

 with a compact area for two operations.

5/8" & 3/4" BORE AVAILABLE

 THREE Position holder

Drill, Tap & reamer Holders

ER Collet Holders

Turning Tools